Modular Ice Fishing Shuttle for Lowrance Hook7

Here is a modular ice shuttle that all the parts printed on an MK3S+. Its parts were designed in tinker cad. I used Petg for everything with 3-4 walls and 30% gyroid infill. Supports are only needed for the transducer holder. 

 Just about all the hardware is stainless ¼-20. For the handle, I used a piece of ¼-20 all thread, with a piece of ½" EMT slid over it. 

You will need a strip of velcro that's about ½" wide. It goes through the battery holder and wraps around the battery. 

I used Kenntha's Lowrance HDS 7 Full Size Mount  https://www.thingiverse.com/thing:5191633 

The transducer arm was from Builder_Ben    https://www.thingiverse.com/thing:3277661/files 

Glow Cup remix                                                                           https://www.printables.com/model/300748-uv-glow-ring-for-modular-ice-shuttle 

TPU Cable Stopper                                                                https://www.printables.com/model/274504-cable-stopper-for-lowrance-ice-transducer

Ice Rod Holder                                                                          https://www.printables.com/model/301571-ice-rod-holder-for-modular-ice-shuttle  

Edit 1/21/24 - added a thinner upright.