50mm cable organizer with USB

Cable organizer with a USB port from which you can make a small table lamp or use it differently.
In addition to the USB, you can fill three wires, there is also a free slot where you can place an unused flash drive or LED lamp.
It is inserted into the hole in the table with a diameter of 50 mm (actually a little larger, since the drill makes the hole not perfect).
You will need a USB extension cable. I used U-green, but other models may be suitable.
If you want to make a lamp, then you will also need a charger with a USB, for example, from a smartphone.

Print instructions

It is best to print the upper part with a layer thickness of 0.6, and the lower part with a layer thickness of 0.7. Layer height 0.3 or less. I used a nozzle 0.8 (but this is not fundamental).