iPhone 14 Pro Wireless Charging Stand

Wireless Charging stand designed for an iPhone 14 Pro with case. I've tested it with my phone with an Otterbox Defender Pro Series and it works every time without having a search for the wireless charger sweet spot. Works without the case as well, but the bottom of the phone needs to be pushed against the wall of the stand for it to find the charger. Other iPhones(or phones in general) may work, provided they are of similar length to the iPhone 14 Pro(5.81in/147.5mm). The case is approximately 6.25in/158.75mm. My wireless charger is 3.5in/88.9mm wide and 7/16in/11.11mm thick, so in theory a wireless charger of the same dimensions should work. Both are linked below.

I printed mine with supports enabled at 75 degree overhangs to ensure the cable channel on the bottom was supported, but I have not tested to see if it will print supportless.

Case: https://www.otterbox.com/en-us/rugged-iphone-14-pro-case-pink/77-88707.html

Wireless Charger: https://www.amazon.com/gp/product/B07YD77RKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1