ELBOW HANDLE

INTRODUCTION: THIS IDEA WAS DEVELOPED THINKING ABOUT PEOPLE WHO ARE UNDER PREVENTIVE AND MANDATORY SOCIAL ISOLATION (ACCORDING TO THEIR NAME IN ARGENTINA) AND HAVE A 3D PRINTER IN THEIR HOUSE.

ORIGIN OF THE IDEA: THIS IDEA IS BORN OUT OF CONCERN ABOUT THE WORLD PANDEMIC. THIS PROJECT IS DESIGNED TO REDUCE THE CHANCES OF BEING INFECTED WITH VIRUSES. BECAUSE WITH THE HANDS THERE ARE MANY MORE CHANCES OF BEING INFECTED IN THE HANDLES.
INFORMATION SEARCH: TO DESIGN THIS IDEA, I INVESTIGATED WHICH MOST APPROPRIATE POSITION TO CARRY OUT THE ACTION WITHOUT ANY DISCOMFORT, THE PLACE WHERE THE ARTIFACT IS FOUND, TO BE ABLE TO DESIGN IT MORE COMFORTABLE AND ELBOW HANDLE.
MEASURES. DESING: TO BE ABLE TO START DESIGNING THE IDEA, WE DECIDED TO MAKE A VIDEO CALL TO BE ABLE TO LISTEN TO THE THOUGHTS AND IDEAS OF EACH MEMBER OF THE SCIENCE CLUB, TO BE ABLE TO SEE THE DETAIL BY DETAIL AND ASSEMBLE THE BEST IDEA.

Print instructions

3D Printing: IT IS RECOMMENDED TO USE THE FOLLOWING PARAMETERS (IT IS IMPORTANT TO CLARIFY THAT THEY MAY VARY ACCORDING TO TH
E BRAND AND MODEL OF THE PRINTER):
• LAYER RESOLUTION: 0.2mm
• WALL THICKNESS: 1.2mm
• FILLING: 50%
• PRINT SPEED: 70mm/seg
• NOZZLE TEMPERATURE: 210 ° C
• HOT BED TEMPERATURE: 70 ° C
IT IS ALSO NECESSARY THAT THE FILAMENT MANUFACTURER RECOMMENDS BETWEEN 60 ° C AND 80 ° C OF HOT BED AND BETWEEN 180 ° C AND 220 ° C OF TEMPERATURE IN THE NOZZLE. ALSO THE EMPLOYEE PRINTER WAS A TRIMAKER COSMOS ll (MADE IN ARGENTINA)