BagSealClips

In times like these, where we pay more attention to our food, can buy fresh food less often and maybe procure larger quantities from local farmers -> we need simple tools to keep food fresh.

This is it: simple, durable, easy to print!

In-place bag sealer clips, can be printed from PETG or other materials. Because of the design, the clip always has tension and seals really well.

I've been using these clips for a while now and they work really well.

I saw a lot of clips in different places but they didn't really make me happy. These are permanently tight due to the pre-tension and the built-in grooves, also work with thin bags, are modeled like a hip joint, can be separated for cleaning and simply put together again.

And hey, no worries, you print them in less than 2h, the big printing time is coming from many different gcode files I have attached.

Print instructions

In-place print.
If your result is fusing together in the joint, lower your extrusion rate. If too loose increase your extrusion rate by 1%.

Three different sizes (an XLarge will follow):
SealBagClip_S3 - Small - pinches up to 9cm, 3 ½"
SealBagClip_M3 - Medium - 13cm, 5"
SealBagClip_L3 - Large - 18cm, 7"

Planned to release XL - XLarge - 24cm, 9 ½"