These are knobs to slip on to the low and high fuel adjustment knobs to Ryobi(and others) Carburetor. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you see fit. I reccomend a 0.4mm nozzle as the shank thickness is 0.4mm. The knob is chamfered on the key side so you can see the index of the adjustment. I recommend marking this part of the knob with a Sharpie or similar. I also have a tool for adjusting the carburetor available here: https://www.thingiverse.com/thing:5574224
https://www.printables.com/model/298927
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
100
Filament: 3D Fuel Pro PLA PLA+
Notes:
I had the best luck printing with the business end up, to prevent elephants foot interference on the toolhead, but had success printing in either orientation on a PEI build plate.
Category: Parts
The author marked this model as their own original creation. Imported from Thingiverse.