BTT TFT35 Prusa LCD Cover

This is a quick remix of the Original Prusa LCD cover for the BTT TFT35. This is a quick, need it in a hurry remix, so not perfect, but looks and functions well. I did not find any other option out there and this cover also clears the print bed.

The brackets mount into the face with (4) 14mm long screws, and the open board mounts use (2) 6mm screws. I did have to apply slight pressure to get the TFT panel in place. It appears that the LCD on the TFT35 can vary in placement on the board compared to the STL files available to design the case. Again, not perfect, but looks like original and works well.

Print instructions

I printed in PETG, with support enforcers on the parts of the brackets that have open slots for the mounting screws.