Designed to fit a 1.5 inch by 1 inch rectangular table leg
Printing:
printed with .5mm nozzle, 20% infill, at .2mm layer height. using the hatchbox blue pla, nozzle temp was 200 and bed temp of 65 using a brim for adhesion though it may not be necessary
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: hatchbox PLA blue Post-Printing =============
Fully drawn up in Fusion360 and sliced with Ultimaker Cura
Category: 3D PrintingThe author marked this model as their own original creation. Imported from Thingiverse.