Clock wifi sync

Ho preso l' idea dal Educational Clock di Jakob  e l'ho fusa con l'idea WiFi Sync Clock 2

da shiura. Ho aggiunto alcune parto per poter usare un motore stepper 28BYJ-48.

Le istruzioni di montaggio ed i files di stampa li trovate  qui http://www.printables.com//prints/293910-educational-clock mentre per la parte programmatica l'hardware ed il file Arduino  potete leggere qui http://www.printables.com/prints/278984-wifi-sync-clock-2 .

Le due leve di bloccaggio vanno montate così:

I took the idea from Jakob's Educational Clock and merged it with the WiFi Sync Clock 2 idea from shiura. I added some parts in order to use a 28BYJ-48 stepper motor. The assembly instructions and the print files can be found here http://www.printables.com//prints/293910-educational-clock while for the programmatic part the hardware and the Arduino file you can read here http: //www.printables. com / prints / 278984-wifi-sync-clock-2. The two locking levers must be mounted as follows:

Mentre il motore e i due ingranaggi, new_minute_gear e new_motor_gear vanno montati così

While the motor and the two gears, new_minute_gear and new_motor_gear must be mounted like this

Modificare il file .ini così:

Edit the .ini file as follows:

Sostituire i files originali con i files mod_(es. B_planet_carrier con mod_B_carrier_planet)

Replace the original files with the mod_ files (eg. B_planet_carrier with mod_B_carrier_planet)