Kar98k Pen Remix

Remix of FreddyZ's awesome Kar98k bolt action ballpoint pen

The original design is done very well and the parts fit together very well.  Also an excellent idea!

The reason for this remix is mainly for strength.  The parts are printed laying down except for the bolt.  The bolt should not need sanding due to the print orientations.  Also, the bolt pin is now built in since the barrel has been redesigned to not need to remove the pin.
I changed the barrel to be easier to remove when changing ink the cartridge.  It now drops in and slides forward to install it instead of having a pressure fit.  There is a built-in pin to keep it forward.
I changed the bolt handle to be bent like the real weapon.  It's now 2 pieces and has a square pin where it goes into the bolt so it won't rotate.  I glued mine together but you might get by with a pressure fit.
I added a butt plate which will need to be glued on.  I also added a stand.

Everything is set in the correct print orientation so just print them as is.

It will take some post processing to clean everything up, but it will be a much stronger model.

I redesigned everything except the front sight but I included it for completeness.

I printed everything at 0.10 resolution except the stand, I printed at 0.20.
The stock and front piece need supports everywhere.
The barrel, front deco, bolt, and bolt handle need supports on build plate only.
The rest don't need supports.

I named the parts by the color I printed them in, but of course you can print them any color you want.