W!LD swallow

Design

A swallow, reduced to the max, simplified to geometric shapes that still meet the proportions and look of a swallow. Nice to look at and easy to make!

Construction

The swallow consists of two parts, a left and a right, which are actually mirrored. This makes the two halves easily printable, even without supports if you want and after gluing them together you have a bird with a nice, smooth surface.

Files

• nologo_design_wild_swallow.3mf - The complete bird as 3MF
• nologo_design_wild_swallow.gcode - Ready to be printed in PLA with your MK3/S/S+
• nologo_design_wild_swallow.stl - The complete bird as STL
• nologo_design_wild_swallow_right.stl - The right halve as STL
• nologo_design_wild_swallow_left.stl - The left halve as STL

Slicing & Printing

The files can be printed without supports but we recommend print with supports from build plate because the tail just looks nicer and gets smoother like that. Above that there is nothing special or complicated about printing and therefore just a remark if you are printing both halves together at once we recommend to have a good temperature and retraction setting to avoid stringing between the two halves.