W!LD sparrow

Design

A sparrow, reduced to the max, simplified to geometric shapes that still meet the proportions and look of a sparrow. Nice to look at and easy to make!

Construction

The sparrow consists of two parts, a left and a right, which are actually mirrored. This makes the two halves easily printable without supports and after gluing them together you have a bird with a nice, smooth surface.

Files

• nologo_design_wild_sparrow.3mf - The complete bird as 3MF
• nologo_design_wild_sparrow.gcode - Ready to be printed in PLA with your MK3/S/S+
• nologo_design_wild_sparrow.stl - The complete bird as STL
• nologo_design_wild_sparrow_right.stl - The right halve as STL
• nologo_design_wild_sparrow_left.stl - The left halve as STL

Slicing & Printing

There is nothing special or complicated about printing and therefore just a remark if you are printing both halves together at once we recommend to have a good temperature and retraction setting to avoid stringing between the two halves.