Cable/cord holder/organizer

I saw what you can buy from the cover photo and I wanted to remake it 3d printable. So I had to change the design, but you can print it now. I also give you the Fusion360 file so you can improve it (let me know if you do it) or customize it somehow.

right now the hole is quite big, but you can reduce it with fusion360.

Print it with flexible filament, any other filament is a waste of time.

You might think that the bottom side is too thin, but it has to be stuck with double side tape wherever you like it, also in rounded planes.

Just remember that whatever printer you have when you print flexible filament you have to go very slooooowww and no fan.

The models do not need supports if laid on one side.

The original idea is not mine, but the models are designed by me. So that if you want you can buy the original somewhere on Internet, but if you can print it and customize is better :).

As usual ENJOY…

Printer settings:

• 4 walls
• 40% infill
• 3 bottom, 4 top 
• 225° no fan
• 30mm/s speed (max)
• whatever flexible you like
• no retraction, 
• Z seam alignment: shortest (reduces printing time and goes along with no retraction)