Prusa MINI+ screen shelf bracket

I really like this orientation of the printer, gives excellent access to all the controls and the screen is now easily visible and usable while sitting at the desk below.

Made to fit a standard 18.5mm particle board shelf, but feel free to edit the model files to suit your needs. The cutout in the top part is for the foam foot of the printer, to align it visually with the extrusion.

Mounts using the stock screws. Just remove the top 2, fit through the slots on the sides and stick an allen key through to srew them back in their place.

Prints on its side, no supports. Check the hole features to get it the right way up. I used Prusa orange ASA with 3 perimeters and 10% infill on a Prusa MINI+ predictably