feelfree lure trolling motor mount

this is feelfree lure trolling motor mount
11
58
0
1537
updated October 25, 2022

Description

PDF

this is feelfree lure trolling motor mount I originally design it for my lure 10 v2 but I try my best to make it compatible with other feelfree kayaks modules and sizes that have a built in rudder hole mount. however its only been tested on feelfree lure 10 v2 and you may need different spacer piece which I can make it if you add the measurement in the comment of this post (***NOTE***  ***DISCLAIMER*** IM NOT RESPONSIBLE IF THE MOUNT DID NOT FIT OR WORKED ON YOUR KAYAK ****************    BUILD IT ON YOUR OWN RISK************)

printing setting: 100% infill 

Filament : PETG/PC/ABC ( Important note*** Do Not Use PLA or PLA+ for this mount except if you want to peddle your way back to shore without your motor lol )

I used ½" diameter bolt 4" long with locknut to bolt it in the rudder hole on my lure 10 v2

1 bolt 1/8" diameter 1: long 

also you will need 2 rails ( 2040 Aluminum extrusion profile) the length depend on your feelfree module and size I used 15.5" on my lure 10 v2 just because that what I had on hand during build but it cold be few inches shorter or longer 

2 M4 with locknut to mount the aluminum extrusion profile to the 3D printed mount 

2 yak attach adapter for uni track or a DIY from a metal washer +2bolts+wing nut

Tags



Model origin

The author hasn't provided the model origin yet.

License