60x25mm Fan Mod for Cheng Liang P360W24V Powersupply - TwoTrees Sapphire SP3

Many cheap printers are using the Cheng Liang P360V24W power supply. The biggest flaw of that model is the loud fan inside the PSU. There are a few cover mods on Printables, but they all just work when the PSU facing out of the printer. If you have then in an enclosure, like the TwoTrees Sapphire PRO or Anycubic i3, the space is much more restricted. 

Therefore, I made this cover, which mounts the fans from the inside and is slightly relocated to allow not only slim 60x60x15, but 60x60x25 fans, which are capable of more air transportation, which being still silent. 

To have a better range of fans, I added a little clip on section for a super-cheap mp1584 dc-dc converter. So, you can use 12V fans in a 24V PSU case as well. 

WARNING: 

Working on PSU is dangerous as you are working with main voltages and large capacitors! Only work on PSUs when you are a trained electrician. Main voltages can harm and even kill you! 

Source for the dc-dc converter: 

mp1584 / mp1584en on AliExpress: https://www.aliexpress.com/wholesale?catId=0&&SearchText=mp1584+dcdc&spm=a2g0o.home.1000002.0 

Nice Fans: 

Sunon 60x60x25mm Mag-Lev: HA60251V41000UA99 

Noctua 60x60x25mm FLX: NF-A6x25 FLX