Ignore the mess but the print is great....now to get the acrylic in to completely enclose it.
The "Help! I can't decide!" Lack enclosure
A Lack table printer enclosure that is easily taken apart for better printer serviceability.
In the contest Lack Hacks
169
269
3
5765
updated
August 6, 2023
Makes
Comments
i dont find the legs on 0.4 nozzle.
@Mullcom It is the same model, just print with a 0.4mm nozzle instead. The categories on the file page are really so people don't print models that are meant to be printed with a 0.4mm nozzle, with a 0.8mm nozzle. I will edit the categories so it is less confusing.
(deleted)
you dont mejtion the panels size I need to buy :<
@k014_2872 Ideally, the side panels should be 624 x 448 and the doors should be 618 x 223 HOWEVER, real life is not ideal so you should measure the size yourself after the frame is assembled. The ability or inability to get precision cuts should also be taken into account and won't be the same for everyone. These reasons are why I did not include official measurements. (edited)
@Halles_379576 ahh makes sense