Lithophane lamp base

A rechargeable lamp base for a cylindrical lithophane, battery 18650, Tp4056 charging module and a small switch are required.

The lithophane was made on https://tool.itslitho.com/ when making the lithophane  enable the lamp option and use the next parameters:

• Height: 20
• Thickness: 2
• Diameter: 20

I recommend using only 3 connectors, you can change the connector's width and height should look something like this:

Print everything to 100% scale to avoid fit issues, no support is required, the base and battery holder must be printed upside down, .step files are included