Parametric Skadis Pegboard

Input your x and y values to create a pegboard with as many holes as you require.
I've just this second learned how to create a parametric model in Fusion360 so please go easy on me, the editable parameters are the number of segments (each 2 offset holes), the hole fillet radius, the external fillet radius, the corner fillet radius, and the overall thickness as the painted Skadis is a different thickness to the unpainted one.

The general idea behind this is just so people can 3d print or route custom-sized pegboards without needing to model it all from start to finish.

currently, the space between the holes and the outside edge is uniform and permanent, if anyone sees this and thinks that should be adjustable then I will do it but I don't need it so I'm leaving it for now

the pegboard automatically combines at the end of the generation into a single body, because it was a bit glitchy and wouldn't display them correctly when imported into slicer software otherwise. it takes a few seconds for it to combine

Each segment is 40*40, and there is a 5mm space around all sides so your board size will be (40*X)+10 wide, and (40*Y)+10 tall. e.g. 5x5 will be 210x210mm