4x Sheet Holder w/Square Nut

Edit 10/31/2022: Finally got around to printing it myself and can 100% confirm it fits the printer like a glove. (updated it to include pictures)

READ TO UNDERSTAND CHANGES FROM ORIGINAL:

• Overall height is 65mm (5mm taller than original) This is because in order to add a 4th slot and keep the step like functionality I needed to make it 5mm taller. This does not affect the locations of the holes nor the contour of the acrylic plates.  See Picture Below:

• Thickness is 7mm more than original (again this is because of the added 4th slot) See Picture Below:

• Length: NO CHANGE
• Added slots to insert square nuts (instead of threading into the plastic) & made the hole deeper (so a longer M3 screw can be used) Square nuts come from spare parts
  • Square nuts are embedded from the bottom purely for aesthetic reasons. You will need something long, thin, and fairly robust to push the square nuts into place (like an Allen wrench) See picture below:

HARDWARE NEEDED:

2x M3nS nuts (can be found in spare parts bag)

2x M3x8 (can be found in spare parts bag)

Print instructions:

• 0.30mm DRAFT
• PETG
• 3 shells
• 15% grid infill or more.