Welcome the New Year with a 3D printed 2015 Gimbal. Perfect as a table top decoration or a party favor.
Learn how to customize your own gimbal at http://designmaketeach.com/2014/05/06/3d-design-personalize-a-gimbal/
Printed at 0.2mm layer height on a Metal Printrbot Simple.
Please leave a comment or contact me on Twitter @DesignMakeTeach or on Facebook at Facebook.com/DesignMakeTeach. I love to talk with teachers, designers and makers about 3D printing and Learning by Making.
This design should print nicely on a Printrbot Metal Simple with no raft or support. Should spin right off the print bed with minimal work. If the rings are fused, try adjusting the filament diameter. I usually start by adding 0.1mm to the measured diameter of the filament I am using. If the filament measure 1.68mm using digital calipers, I will tell me slicing software that the filament diameter is 1.78mm.
Category: DecorThe author marked this model as their own original creation. Imported from Thingiverse.