Porsche Parking Only Sign

This model is self explanatory.  I created it for a friend as a B-day present. They got two 2 sweet Porches (I can only dream someday I will too). Anyway… Printing Details

I printed:

• No bottom layer (infill only, since it ideally mounts against a wall). 
• 0.30mm layer height
• PETG
• Warm enclosure at about 100-110 (Degree F)
• Print time was around 4 hours
• Changed filament on the fly from Red to Black at 3.5mm

Decided to print the Porsche logo on paper and glue on a flat badge. If you have a resin printer or a .25mm nozzle you could try and take on printing the detailed badge but it looks tight.

Happy printing and good luck!