Soap Dish - Tropical

A simple but elegant soap dish to elevate your bathrooms appearance.

This is a less fuzzy remake of TZTs awesome Soap dish https://www.thingiverse.com/thing:3857978 . The tolerances have been set to 0,15mm on each side, which fits nicely without wobbeling straight from my Prusa Mini. I chose a 0.1mm layerhight for the insert, which results in a nice, smooth curvature, and I reccomend this for the whole model!

I could not adjust the original .stl the way I wanted to, so I redrew the whole thing. If you want to adapt the design to your liking I have also included the fusion 360 sketch.

Cheers!

PS: don't get confused. The parts may be displayed upside down, but they are all carved out the way they should be!