A small jar to store some goods. There are jars with width 30mm and 60mm. The 30mm the have hights 15, 20 and 25mm. The 60mm width jars come in 20, 30 and 40mm height. After printing you should screw the jar and lid back and forth and clean the thread with a tissue a couple of times, in order to grind the thread in and make it rotate smooth. The longer you screw, the smoother it gets. If you can't turn the lid, try printing it just a touch bigger.
jar_15 is the smallest and will fit well in your pocket ;)
No supports needed. Normal infill. Thread will also work with 0.2 layer height.
For that 60mm hexagon jar see: https://www.printables.com/model/375057-hexagon-threaded-jar
Update 2021-04-01: I just uploaded the blendfile. As a goodie you'll find an additional lid with an engraving and a jar with honeycomb pattern in the blendfile.
Update 2022-04-18: I added the jars with 60mm width.
The author marked this model as their own original creation.