Organizers with 4 slots for Durham Mfg 5-3/8" Drawers

Two variations on a drawer organizer I designed to better hold pens in my 24 drawer Durham drawer cabinet, should also work with other Durham cabinets which use 5-3/8" wide by 2-3/4" high drawers.

The first model simply drops in, and can shift to one side or the other to adjust the size of the outside slots slightly. The second features a built-in drawer divider to engage the slots in the sides of the drawers and separate the drawer into different halves (It should be the same height as the first, but I ran out of filament and decided it was good enough.) The slots are to reduce material usage and make it slightly easier to grab pens.

These are designed to print in spiral vase mode with a 0.6mm nozzle, but the wall thickness is narrow enough that you should be able to get away with a 0.4mm nozzle and 0.6mm external perimeter width. The flat bits on the build plate on the part without the divider are just there for increased bed adhesion, if you don't think you need that, clip off 1mm of the bottom of the part. Both parts are included in the attached 3mf file, but in spiral mode only one can print at a time, so de-select the ‘printable’ attribute on one.