Barista small knockbox for espresso coffee machines with a piston

Narrow knockbox (110*110*100mm) with lid for barista piston portafilter.

At the bottom are 6 recesses of 10 mm in diameter for anti-slip feet to ensure that the box does not slip and to absorb the stroke vibration during the knocking out of the piston.
I printed it with TPU filament, but felt caps for furniture will suffice as well.
I printed the box, yoke and lid with PETG filament, but any other non-flexible filament is also possible.

Only the lid needs support.
The box and lid 0.2mm layer thickness with 10% infill.
The yoke 0.2mm layer thickness with 50% infill.
The non-slip feet with TPU, 0.2 mm layer thickness and 100% infill

Enjoy a fragrant and tasty cup of coffee.

                    

Support me with a cup of coffee