Print in Place Sliding Number Puzzle

UPDATED: see the new and improved print here: https://www.prusaprinters.org/prints/103948-sliding-number-puzzles-print-in-place-15-puzzle

These are my 3d printed version of the classic sliding 15 puzzle. I've also included a 3x3 8 piece and 5x5 24 piece puzzle.

These print in place, so It requires a pretty accurate printer. The .stls here have a 0.22 mm tolerance which is what worked for my Prusa MK3S, but you can change this in the fusion files I've also included. Just go to modify > change parameters > and edit the tolerance value.

You'll also notice that you can use the parameters to edit the size and number of pieces if you wish to experiment with those. Just keep in mind you'll probably have to redo the text for the numbers.

Print instructions

Print at a finer layer height for smooth movement. Otherwise use what works well for you!