Nikko Transmission 1/10 Frame Buggy Rhino Bison F10 Golden Arrow

This is a custom design! It is meant to replace the original using the original hardware. It should fit, but it is different than the original. It is thicker, and should be a better 3D Printed part than if I had tried to make an exact copy. I spent way to much time on this. :-) So please tip if you use this design.

I suggest you print the Hole-Test.stl before you print this transmission.  Make sure the bearings and the Gear Pin fit tight.  If the hole aren't correct, adjust your “Hole Horizontal Expansion” setting in Cura and print the test again until it's correct.

There are two versions. They are the same except for the shock mounts.

You will not need the original motor brace. A 36mm motor should sit directly on the transmission. If you are using the original RS-540 Motor, you need need the included Spacer. For other motors, you can scale spacer as needed.

**Want More Free Designs? Like and comment. Knowing people are using my designs keeps me motivated to make you. Thanks!

I'm releasing these files under the Creative Commons Attribution-NonCommercial-NoDerivs (CC BY-NC-ND) License. This license is the most restrictive, only allowing you to download and share them with others as long as you credit me. You can not change them in any way, or use them commercially.