This is a small fixture to mount the Flair 58's electronic control box to the neck of the machine.
It's not absolutely perfect. As seen in the photos there I've added a small adhesive rubber bumper to the inside of the mount. Without the rubber bit, it may jiggle a bit so anyone who wants to modify it could make the collar smaller so it can friction fit a bit tighter. I'm uploading this as is since it works and I don't think its worth printing another copy.
I printed this with the mounting side facing the bed. There should be minimal supports neede only at the neck of the bridge. This took me 3.5hrs to print at 0.2mm layer height.
Other materials needed is just a strip of double sided tape, I used the 3M foam kind and it holds pretty well and can be readjusted if needed.
Hope this helps anyone who owns a Flair 58!
The author marked this model as their own original creation.