BreamiS Valve for Decathlon Easybreath

Version with improved airflow of Breami Valve

Like Charlotte valve this design allow to connect Decathlon mask to respirators and alternatively two 22mm filters.
Designed with the intention of creating a piece that is an excellent compromise for printing with less material, less printing time and best results.
The fitting with the mask and the filters has been tested, and is in my opinion excellent.
Print as in the picture.
The filters in picture are only demonstrative.

This remix was made in collaboration with Prof. Stefano Papa of University of Naples "Federico II"

v1.1 improved walls and minor modification

If you can donate to support me, the donation will be used to help health workers and doctors

Print instructions

Layers 0.20
3-4 perimeters.
Infill min. 15%
Supports only for the first 13mm of printing.
Min raft 2 layer, reduce the distance from the raft and the supports, the piece will come off anyway. If you print with a 0.6 nozzle you can also print at 0.3mm layer
Print as a picture

Print required only 32gr of PLA (Better if FDA compliant)