Mavic 5D Button

Didn't feel like spending $6 on a new button so I modeled one in fusion 360 after the models I found online didn't have the ridges or bubbles like the original did. Printed on the Form 2 at 0.025mm layer height and 100% infill. In total it used 0.22ml of resin.

Print Settings

Printer:

Form 2

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

.0025

Infill:

100

Filament:

Formlabs Black V4 UV Resin

Notes:

Could be done on an FDM printer but an SLA or DLP is recommended for a small detail part.

How I Designed This ===================

Modeled in Fusion 360. Original model provided for remixes.

Category: R/C Vehicles