Vive link box 3.5" drive bay mount

This is a 3.5" drive bay mount for the HTC Vive link box. To get any use out of this you will need to power the box from your PC's PSU and find a way to route the USB and HDMI cables inside the PC.

You will need 4 M3 6mm self tapping screws.

Powering the link box can be achieved by wiring up a 1.35mm male barrel jack to a Molex connector.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

20%

Notes:

Print face down