Mobius 2 Quick Release GoPro adapter

A simple quick release GoPro compatible adapter/mount for the Mobius 2 camera. Just slide the camera in to the enclosure. To remove, just push down on the tab and push the camera out.

It has a cut out on the side so you can access the buttons.

I wanted something that would allow me to quickly remove the camera whilst providing a strong and sturdy hold. The enclosure has a small gap between its walls and the camera causing a rattle, so the sturdy part needs some work, but it is fully functional.

Youmust not print this on its back or front. I recommend printing side on for maximum strength. If you print on the back or front the layers will snap instead of flexing like it's designed to. If you print upright or up-side-down you risk breaking the case on the thinner parts on removal of the supports. Printing side on will result in the print being strongest where it needs to be.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

At least 20%

Notes:

You must not print this on its back or front. I recommend printing side on for maximum strength.