Make Flyingbear Reborn compatible with RatRig/VZBot and Eva 3D project
X: 348
Y: 322
Z: 340
BOM
- M3x16 and M3 T nut: 8+ (better 14+) For rail adapters
- X - MGN12H 400mm...450mm
- Y - MGN12C 350mm...365mm (or any compatible with eva 3d project), for 400mm portal holders must be modified
- M3x8 - 8+ for portal holders to MGN12H carriage
- M3x6 - bunch of them
- M4x6..8 - bunch of them
- M4x12..16 - 2 for motor belt tensioner
- M4 D5 20mm+ bolts: 7+ for pulley
- M4 D5 30mm+ bolts: 1+ one corner (or custom adaptor needed for use shorter one)
- 350g+ of PLA/PETG/ABS :)
- Carriage from: https://main.eva-3d.page/
- 2020 aluminium profile or carbon 400mm..430mm
- M4 35-40mm + M4 nut: 2 for Eva belt tensioner
- Open GT2 Belt 10mm 5m
Useful links:
Changelog
V11:
- New motor holders, belt tensioner exists on eva carriage, so lets allow change horizontal position of motors to make belts inline with portal
- Trim down width of portal holders by 0.5 (cosmetic)
- Portal holders _R1 for first version of rails adaptors https://www.thingiverse.com/thing:5145741
- Added X flag for R1
- Added seilfin extruder mount
V10:
- Updated idle pulley Y Min - wrong height
- Updated Portal holders - max profile size 428 -> 430
- Added Y Max rails offset models 27mm length for precise positioning
- Added vulcano Z Endstop
- Updated Y endstops
- Added long cable holder
V9:
V8:
- Motor moved outside by 1.5mm (4.5mm in sum) - mostly fixed belt in line
- Sligtly slimdown motor holders
- Moved path for 4 wire motor cable to internal side
V7:
- Motor moved outside by 1.5mm (3mm in sum) - try to fix non in line belt
- Sligtly slimdown motor holders
- Increase bolt size tolerances
- Added path for 4 wire motor cable
- Add a note about shift of lazy pulley
V6:
- Drop old versions
- Slim down the portal to avoid scraping walls
- Motor moved outside by 1.5mm - try to fix non in line belt
V5:
- Tight fit for 420mm profile
- Add 3rd bolt holder for profile
V4:
- Allow installing 20x20 profile aluminum or carbon
- Add motor holder for M4 nut + bolt
V3:
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
20%-35%
Notes:
Use 1.6-2mm thick walls
Example printing orientation has been in pictures.
Category: 3D Printer Parts
Tags
The author marked this model as their own original creation. Imported from Thingiverse.