The smaller vase is my go to vase for gifts. The design is really nice to add an accent color, you can be as subtle or bold as you want. If your printer is dialed in the filament slides in the grooves easily
3 jarrones para adornar con filamentos otros colores
3 jarrones para adornar, con filamentos de otros colores 1.75,. Modo vase,
In the contest Vase Mode Vases
252
726
15
2874
updated
October 5, 2022
Makes
Comments
would anyone maybe like to share slicer profiles for cura or prusaslicer please? my 2nd attempt still wont take the filament decoration with xy comp of +0.01 the filament sticks just as it reaches the larger diameter part, but is now really loose where you start it off :(
@palulukan How nice, the good thing about the double wall, is how strong it is, work on that model to get a strong vase, not a vase mode that are weak
The 2 perimeter, large one came out absolutely awesome👍👍
But now I'm having trouble threading the filament in!
Anyone suggest a setting to loosen the channels just a little please?
@JustinRichards si va muy justo puedes aplicar expansión horizontal, pones -0.1 y tienes 0.2 de hueco en diámetro
if it's too tight you can apply horizontal expansion, put -0.1 and you have 0.2 diameter gap.
@LjhtomJavierHernando Gracias ;)
Ive mainly moved onto prusaslicer now, so I will adjust the xy compensation
Did the smaller vase with spiral mode, 0.2 lh, 0.8 width. Result looks bloody great 👍 but I had to heat form the filament decs as they just kept popping out.
Going to try the large one but not in spiral, just 2 perimeters, 0 infill.
Cheers buddy
@JustinRichards uju, Green Green, 👍👌
The small one printed nicely in vase mode. Can't wait to try the others with thicker walls
I had to upscale the x and y to make it big enough for filament. You can’t use vase mode in cura, it does something weird. I got the same weird under extrusion type errors in the same spots no matter what filament I use.
