One piece hinge for Ikea Lack enclosure - Print in place

Smaller holes take M3 screws to hold the acrylic door.
Bigger holes take 4mm countersunk wood screws.
You need to print it in one go without using supports. I used white ABS.

07.04.2020 Added a few more variants of this hinge, including longer on one side and with big holes on both sides as well

If you found this project helpful, you can Buy Me a Coffee at the link below :

https://buymeacoffee.com/mars.explorer

Print instructions

You need to print it in one go without using supports. I used white ABS.