Startt / Tronxy-xy100 X-axis Mod

I've created Prusa i3 mk3 inspired x-axis parts for Startt printer.

Belts tensioned by X stepper tilt, adjustment by extra screw pushing on mounting screws

There are 2 versions of idler side part:

x_idler_v3 - Version for 5mm id, 6mm wide bearing idler

x_idler_v3_3mm - Version for 3mm id, 9mm wide idler pulleys (T16's)

All mechanical components (Rods, Bearings, x carriage) are transferred from startt printer.

Motor mounting screws need to be min 17mm long

You will need additional M4 x18 (can be longer) cap screw and nut for tensioner

In some cases slightly longer belt will be required (depends on how your original one was cut)

Print Settings

Printer:

Startt

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.2

Infill:

30%