Can Lid (75mm Diameter or 415g, eg Baked Beans)

Remix of my large can lid for my dog food. Also see my TPU versions,

Avoid brittle PLA's for this, it needs some flex. If you are using TPU or other flexible filaments you can scale X Y in for a tighter fit. Snaps on perfectly with this PLA+.

Print settings (Cura):

Walls x 3

Top/Bottom x 6

.2mm layer height

.4mm width

210c print

60 c bed

60mm/s

Flow 94% (gives me accurate measurements without any signs of under extrusion)

Coasting enabled

Coasting Volume 0.032 (helps remove the seem)

Fan 0% first layer to 100% at layer 5

No brim or skirt needed

Print Settings

Printer:

Voxelab Aquila S2

Rafts: 

Yes

Supports:

No

Resolution: 

.2

Filament: eSun PLA+ Orange Post-Printing =============

Category: Containers