Skadis Holder: Calipers (uses heat set inserts)

Skadis holder for common calipers, remixed from Printuin's caliper holder in his excellent Skadis Mount Collection to use heat-set inserts for mounting instead of integrated pegs.

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

• Printed hooks
  • See linked project for more details
• M2.5 heat-set inserts
  • CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
    • Prusa Eshop ($11.99, 100 pcs) 
    • CNC Kitchen Store (€9.99, 100 pcs)
• M2.5 screws
  • McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)

Printing Notes

Designed to print with the mount holes down, without any supports.

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.