Skadis Holder: Solder Spool Rail (uses heat set inserts)

Simple Skadis holder for solder and desoldering wick spools with 18mm+ internal diameter.

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

• Printed hooks
  • See linked project for more details
• M2.5 heat-set inserts
  • CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
    • Prusa Eshop ($11.99, 100 pcs) 
    • CNC Kitchen Store (€9.99, 100 pcs)
• M2.5 screws
  • McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)

Printing Notes

This model has two parts, a body and a rail that fits between its arms. These two are basically friction-fit. This works fine for my use case but admittedly it could be improved quite a bit, so feel free to remix it into something more resilient. :)

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.