Skadis Soldering Station: Pinecil (x2) and Hakko Tip Cleaner (uses heat set inserts)

Skadis holder for two Pinecils and a Hakko 899 tip cleaner, with a bonus tiny platform that can hold a Miniware MHP30 mini hotplate.

Nice companion for mounting below the Skadis Pinecil tip holder: https://www.printables.com/model/287843

This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks.

Required Parts

• Printed hooks
  • See linked project for more details
• M2.5 heat-set inserts
  • CNC Kitchen “M2.5 Standard” (ø 4.6mm, depth 4.0mm)
    • Prusa Eshop ($11.99, 100 pcs) 
    • CNC Kitchen Store (€9.99, 100 pcs)
• M2.5 screws
  • McMaster Carr 92000A105 (8mm, $4.74, 100 pcs)

Printing Notes

For printing any heat-set insert project on a FFF/FDM printer its a good idea to use 4+ perimeters to make sure that there's enough surface for the inserts to bite into.

My test and final prints were done on a stock Prusa MINI+ with Prusament PETG. PLA and other materials should work fine though.