Inside Drawer Mount for Thermopen ONE

This is a quick-printing cradle for a Thermopen ONE, intended to mount inside a convenient drawer with double sided tape. It's not too tight and doesn't enclose more than necessary to make it easy to get the thermometer in and out when you need it.

The model for 0.6mm nozzle is intended to print with a 0.9mm external perimeter and at least 1.7mm of bottom layers, the 0.4mm nozzle model should use 0.6mm external perimeters and at least 1.4mm of bottom layers (or, as configured in the 0.4mm 3mf file, cut off 0.6mm or so to save print time.)