Name stand for guests to mark their seat at the table.
PRINTING:
- optimized for 0.2 layer height
FRONT:
- print flat
BACK:
- print on side with heart symbol
Tested with Prusament PETG. PLA should be fine.
Stand is prepared for 45x70mm paper name cards. SVG example file is attached.
ASSEMBLY:
- put paper card into slot in front part
- slide the back part into the front part with heart symbols location matching
- push until you hear click (parts will be gently lock)
Size of the stand frame is adjusted for Prusa Mini+. Print bed fits 3 sets of stands.
On Prusa MK3S print bed fits 4 sets.
STEP files are included for your own customization. You could use "front_with_heart" model as an inspiration.
The author hasn't provided the model origin yet.
