Tyco R/C Taiyo Gears Turbo Hopper Jet Hopper Bandit Fast Traxx

Tyco / Taiyo Gears Turbo Hopper, Bandit, Twin Turbo, Fast Traxx

I have designed various gears to fit some Tyco R/C & Taiyo R/C Vehicles.

Each model has two different versions.

One that is stock and one that accepts a bearing.

I don't know every model these fits so I have listed the Specs.

Tyco Turbo Hopper (Same as Fast Traxx I think)

• Small Gear: (Slow Gear)
  • 10 Teeth
  • 32-Pitch
• Metric Module = 0.8 Module (.7938 millimeters)
  • Medium Gear: (Fast Gear)
  • 17 Teeth
  • 32-Pitch
  • Metric Module = 0.8 Module (.7938 millimeters)
• Big Gear: (Spur Gear in the Center)
  • 43 Teeth
  • 42.3-Pitch
  • Metric Module = .6

Tyco Bandit

• Small Gear: (Slow Gear)
  • 9 Teeth
  • 32-Pitch = 0.8 Module (.7938 millimeters)
• Medium Gear: (Fast Gear)
  • 12 Teeth
  • 32-Pitch = 0.8 Module (.7938 millimeters)
• Big Gear: (Spur Gear)
  • 43 Teeth
  • 48-Pitch = 0.53 Module (.5288 millimeters)

Tyco Twin Turbo

• Small Gear: (Slow Gear)
  • 10 Teeth
  • 32-Pitch = 0.8 Module (.7938 millimeters)
• Medium Gear: (Fast Gear)
  • 16 Teeth
  • 32-Pitch = 0.8 Module (.7938 millimeters)
• Big Gear: (Spur Gear)
  • 44 Teeth
  • 48-Pitch = 0.53 Module (.5288 millimeters)

Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.

Information about Tyco Turbo Hopper / Taiyo Jet Hoppers variations:

[https://rctoymemories.com/2012/05/06/tyco-taiyo-turbo-hopper-1986/]

[https://rctoymemories.com/2014/06/08/taiyo-jet-hopper-1986/]

Print Settings

Printer:

Kingroon KP3S 3.0

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

90%

Filament:

3D Solutech PLA

WhitePost-Printing=============

Bearing

Use Bearing MR63 3x6x2.5mm

Category: R/C Vehicles