The most robust magnetic clicky fidget!
I worked through some of the clicky fidgets with plastic springs, getting softer and weaker over time. Trying to fix...
13
33
0
412
aktualizováno
2. října 2022
Popis
PDFBistable mechanism only based on magnets ruling out everything which might wear out.
Base can be printed as oriented, switch itself laying on its side. No supports required, at 3 or 4 perimeters since threads are threaded right into plastic.
BOM to complete:
- 2x magnetic, Diam. 5x3mm (might require some super glue to secure in place)
- 2x ISO 4792 M3x10 (steel screw, not stainless steel, needs to be magnetic)
- 1x ISO 4792 M3x10 as pivoting axis for the assembly
Štítky
Původ modelu
Uživatel se označil za původního autora tohoto modelu.