SV01 Pro 5015 Fan Shroud

Fan shroud for 5015 Blower fan on the SV01 Pro printer
 

Note:
- Print on the side (as shown in photo)
- Add custom supports for the overhang

Overhang test model: https://www.thingiverse.com/thing:419860/files

From the test, the shroud could handle up to 80º overhang

Recommend print in PETG or better to handle high heat

Bill-of-Material:

• 2x M3 x 6mm Socket Cap screws
• 1x M3 x 4mm Socket Cap Screw
• 1x M3 x 20mm Socket Cap screw

EDIT: New revision R4 is added

• Fan mounting hole tighter so the M3 could self-tap into
• Adjusted the fillets around the fan open insert so it can fit easier