ULANZI U Rig Pro Video Light

I purchased the ULANZI U Rig Pro Smartphone Video Rig from amazon (https://www.amazon.com/gp/product/B076FQCWQG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) but in using it I had some lighting issues so found the need for a mounted light. This is a LED light which mounts on the cold shoe mounts of the rig.

Print instructions

Recommended to print the Light Box with 5 or more perimeters due to brass inserts needing to be inserted for the screws.

Prints with supports.

Print the Light Box Cover with a translucent material to help with light diffusion.

Hardware Required:

9V Battery

9V Battery connector

3 x 200mm LED Strip

1 x M3 x 8mm x 5mm Brass Insert Nut

https://www.amazon.com/dp/B0784VYCYY/ref=cm_sw_em_r_mt_dp_U_lFNIEbN29DZQ4

4 x M3 x 6mm x 5mm Brass Insert Nuts

1 x M3 x 6mm Flat Hex Screw

https://www.amazon.com/gp/product/B07D686M7N/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

4 x M3 x 8mm Flat Hex Screws

1 x 10K Potentiometer

3 x M4 x 16mm Hex Screws

https://www.amazon.com/gp/product/B07F1CP27Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

3 x M4 Nuts

Wire