Simple Popper Mega XL AF Pro Adapter

Introducing the Simple Popper Mega XL. Fire a single Mega XL dart from the end of a Nexus Pro or and Aeon Pro for maximum shield busting. Also features a pass through for regular darts. Not tested with any other blasters besides the Nexus Pro and Aeon Pro though it should fit barrel adapters with a 19mm ID. 

The idea for this came to life when I found a bundle of Mega XL dart at a local thrift store but had no Mega XL blasters. But I do have the Nexus Pro and Aeon Pro and I know they have the ability to shoot Mega and Rival off the barrel. So a few minutes in SolidWorks and a few hours of printing and some PETG later, I had this thing.

1. Print Helpers
   1. .2 layer height
   2. .42 line width
   3. orient part with shorter tube on the bed.
   4. supports around the tube.

It should print on the first go. I'll upload some pictures later as well as provide updates as they get made. I printed it just fine out of PETG on my Qidi X Plus though I did have to scale it to 102%. Not sure if due to material shrinkage or some other issue.