CR10 CoreXY Conversion V-Slot with Afterburner

Conversion of CR10 V2 to a CoreXY with V-Slot wheels

Mostly inspired by V-King/V-Baby

Z-Carriage D/C-Bot

Hardware:

• additional 10x 400mm 2020 V-Slot or T-Slot Profiles (some could be longer with minor changes in design), additional 2x 520mm V-Slot Profiles (for Z-Axis)
• all stock profiles are reused w/o shortening
• connected all profiles by tapping center holes and connected them with m5 button head screws
• Board housing can be equipped with 4010 Fan in the front
• Motors are Stock
• Stock Heatbed

-20Tooth GT2 6mm idlers (2), 20 Toothed 6mm Idlers (6)

• For Z-Axis Sync i had some 20T 4mm Idlers
• 2x Stock Z Axis (with the rectangular nuts), shrtened to ~500mm
• 760mm Closed Belt for the Z Synchronization, 2x 20T Idlers (I had with 4mm Axis, so you could tap for 5mm)
• All Profiles, most Screws and Wheels from a CR10 (V2)
• Stock power supply, mounted below
• Stock V-Slot Wheels (14x ~24mm), additional 7 15x9mm V-Slot Mini Wheels
• At least 2x 5x8x1mm Shims per wheel
• You need to extend all cables

-Stock Z Axis upper bearings

• Stock Z Braces are mounted with distance plates as X on the back
• Optional MKS mini 12864 , mini 12864 V3Housing
• Optional Adapter to mount MKS E3, E3D Board instead of SKR 1.4
• Optional: Roomba HEPA Filter, Carbon palets, Strong 40x40x40 Fan for integrated filter

Features:

• Full Build area
• 99% of CR10 V2 reused
• Compact outer dimensions
• Board is for SKR1.4, Display is Stock CR10, MKS1284 Mini or V3
• Board housing with lid, can be opened from the top
• X-Carriage fits Afterburner, Stealthburner with CW1
• X-Carriage has integrated BLTOUCH for Stealthburner V6
• All Parts in ABS/PETG, maybe PLA+ for some
• Lower Part of Feet can be printed optionally with TPU
• Z-Axis Sync
• XY Motors in Front, belts and tensioner on the back
• Board housing with fan
• Optional Filter (Chamber + Left Rear Filter)

I dont remember all sources, if I forgot to add your work as a Remix please give me a notice

There is no BOM or Instructions, you need a lot of fasteners, and you need to connect all profiles (not only with plastic parts)