Megatronics 2.0 Mounting for MendelMax

This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer. Easy, stable and dependable…
0
7
0
115
updated September 28, 2022

Description

PDF

This thing should help you to fix your Megatronics 2.0 board on your MendelMax printer.

  • Easy, stable and dependable mounting.
  • Update: This version has several 3mm holes where you can create a pull relief for the cables by using small cable ties.
  • Optional fan mount for standard 80mm fan.
  • Can be used with "LCD Display and Controller Mounting" http://www.thingiverse.com/thing:220691 for comfortable autonomous printing.

Instructions

  1. Print "Board for Megatronics" on MendelMax.
  2. Fix the Megatronics-PCB by using 6x M3x12, washers and nuts.

3a. (Option) without top mount for fan:

To fix the mounting on the printer you need 3x M5 screws.

3b. (Option) with top mount for fan: If you want to use the top mount for the 80mm fan you'll need 3x M5 threaded rod (Length: tbd.) instead of the 3x M5 screws.

  • (Print and install a fan grid from another project.)
  • Print "Fan Board" and 4x "Spacer".
  • Fix fan on "Fan Board" with 4x M4 screw, washers and nuts.
  • Connect "Fan Board" to "Board for Megatronics" by using the spacers in between on the threaded rods.
Category: 3D Printer Accessories

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License